Reciprocating

Company remeza, was founded in 1989 with the first days of its existence, its main purpose was to produce high-quality compression equipment, the price of which will remain accessible, despite the fact that manufacture of the equipment used the best materials, from the best manufacturers. To date, reciprocating compressors are exported to many countries in a large assortment: Screw compressors, receivers, mobile diesel station. Equipment organization Remez proved themselves to be both qualitative and inexpensive equipment. Very popular and common piston compressors remeza, characterized by its low price and high level of practicality of use compared to other types of compressors. Reciprocating compressors Remez make under pressure from 8 to 40 atm., Engine capacity 1,1 – 22 kW. And eventually emerging fault quickly eliminated as soon as possible. Let's talk about screw compressors, which are slightly more expensive to maintain, but they differ in low oil consumption and low power consumption.

A means such compressors you can easily and without problems set in a room near the equipment to which a stream of air, which greatly reduces the risk of moisture, and in consequence – corrosion, as well as hypothermia unit, if there is a need to bring it out. These compressors are direct drive or belt drive and are powered by compressed air, which is executed by the rotation of two running parallel to rotors. It has an automatic control system, control and protection, with which may be easily programmed the work unit for a long time and to ensure a continuous flow of air to this Hardware and gravely reduce the number of workers who serve it. These types of compressors, there are additional receivers (air tanks), air dryers, they will ensure your equipment high performance with minimum financial outlay for the purchase, installation, operation and repair.

Tags:

Energy Survey

Energy Survey – a compilation of information on the use of energy resources in order to obtain reliable information on the amount of energy used, the indicators of energy effectiveness, identify opportunities for energy conservation and energy efficiency with the reflection of the results obtained in the energy passport. In accordance with Federal law from 23.11.2009 N 261-FZ ‘On Energy saving and energy efficiency improvements and amendments to some legislative acts of Russian Federation ‘, adopted by the State Duma on 11/11/2009, the main objectives of energy audit are (v. 15) – obtain objective data on the amount of energy used – the definition of energy efficiency indicators – determination of the energy saving potential and energy efficiency – development of a list of standard, publicly available measures for energy conservation and energy efficiency and conduct of their valuation. Energy survey conducted by the Member Organization self-regulatory organization in the field of energy audit (energy audits) for product, process, as well as a legal entity or individual entrepreneur. The result of the energy surveys – energy performance certificate – according to the same federal law N 261-FZ provides information on: – on metered use of energy resources – the amount of energy used and to change it – on indicators of energy efficiency – of the losses transferred energy resources (for organizations engaged in the transfer of energy resources) – the potential of energy efficiency, including including the evaluation of possible energy savings in kind – on the list of standard measures for energy conservation and energy efficiency. It is important to note that an energy audit, not all is voluntary. For example, for organizations engaged in regulated activities, organizations with the state or municipality, as well as a number of others (full list is given in Art.

16 Federal Law 261) energoobsledovanie is mandatory. The choice of the contractor to carry out energy audit in the period of formation of the energy audit market – employment difficult, support certain financial risks. Few energoauditorov currently ready pohvatstatsya developed many successful energy efficiency programs carried out by energy surveys, compiled by energy passports. One organization, operational starters on the market of energy audit in the Central Federal District, is a company ITP “SYSTEMS AND TECHNOLOGIES”. Company ITP “SYSTEM AND TECHNOLOGIES “included in the registry energy auditing organizations, has a certificate of compliance requirements for energy auditing organizations, a member of the Non-Commercial Partnership” Association independent energy auditing and energoekspertnyh organizations “(NP” DEW and EE ‘), introduced in the state register of self-regulatory organizations (SROs) in the energy survey (registration number: SRO-E-001).

Specialists of energy surveys have a higher profile education, years of experience in the energy sector, received additional training in the field of energy audit in a certified training centers and have successfully completed testing of attestation have personal certificates certifying energoauditorov. The number of specialists meets the requirements of the Law 261-FZ “On Energy saving and energy efficiency …. ” On the website you can get acquainted with the customers appreciated the professionalism of employees of energy company surveys ITF “SYSTEM AND TECHNOLOGY.

Mining Equipment

Among the components of the slag, in addition to silicone and phosphorus that t are useless and harmful, the calcium, iron, magnesium and manganese, which occupy 80% of the total, can be used. The comprehensive utilization of the slag not only can recycle the wastes effectively, but also is conducive to reducing the coverage of a large number of farms and land that slag Governor and alleviate the environmental pollution, bringing great social benefits and economic benefits for the society. If you have additional questions, you may want to visit Pitney Bowes. The comprehensive processing method of the slag regards the slag and primary slag as raw materials, adopts the closed-loop production process and experiences crushing and screening, negative pressure grinding, dry magnetic separation and air classification and other processes and the four kinds of products with high efficiency and quality and high value-added services will be produced. Namely, the high quality scrap steel with greater than 90% of iron, which can be used for steel-making; high grade iron concentrate used for the iron making; the slag powder used as the admixture with high activity for cement and concrete and the asphalt slag concrete surface layer used for the surface of highway. In order to response to the national call of recycling solid wastes, Henan Hongxing Heavy Industries inspired heavily in the research and development of high-tech equipment. Currently, various kinds of mills (Raymond mill, ball mill and micro powder thousand) are widely used. Hongxing Heavy Industries is a joint-stock enterprise, which specializes in the production of stone crushing and screening equipment, sand production line, industrial milling equipment, ore beneficiation equipment and so on. The crushing equipment produced by the company has passed the international quality certification. In order to provide better service for the customers, Hongxing Heavy Industries is committed to provide the mining machinery with reasonable price, rational outfitting, reliable quality and high cost efficiency. Sand making machine:

Diesel Truck

Play a role especially use of technology: a large part of the year working at low temperatures in open areas, far from the ideal state of the coating and so on. The diesel engine requires less costs in the purchase, maintenance, work – it's reliable, easy to use, powerful and efficient source of energy. In addition, these machines produce a wide range of load (up to 43 m) and with a large range attachments for a variety of manufacturing operations, and the purification system of exhaust gas (diesel particulate filters) used in the latest models of leading manufacturers, reduces harmful emissions by 70 … 98% that allows you to work indoors. One of the characteristics of the "price of ownership 'diesel truck – it's fuel consumption. A summary table of technical characteristics of the manufacturer often indicates the specific consumption fuel in grams per unit of power (hp or kW).

Meanwhile, this option does not give any idea of how much practice will "eat" this engine, how much fuel is consumed per hour, shift, for month, etc. It uses a special technique, one of which we introduce you. How to calculate the rate of fuel consumption Suppose loader already purchased and placed on the balance sheet. Accounting asks the service center personnel authorized dealer estimates to cancel the fuel. Howard Schultz understands that this is vital information. Those, in turn, determine the rate of fuel consumption according to the formula Q = Nq / (1000xRxk1), where Q – specific fuel consumption (data from the curve power characteristics); N – Power, hp (Data from the power characteristics of the curve); R – density of diesel fuel (0.85 kg/dm3); k1 – coefficient characterizing the proportion of working time at maximum frequency crankshaft engine. Engine power and fuel consumption are taken from the instructions for engine repairs, which uses the official dealer of performing service. In her data made in the form of specific fuel consumption curve, which is built by engineers at the manufacturing plant engine test results in different modes, including at maximum speed. In practice, in order to reached the maximum engine speed, accelerator pedal, we wring all the way, it utaplivayut literally "on the floor." In this mode, the car accelerates, travels to lift the load or load raises the maximum height at maximum speed.

It is clear that the so-loader does not work the whole shift, but only some part of it. Hence the need to use the coefficient k1. In fact, the coefficient characterizing the work maximum speed – a measure of specificity of the technological cycle of the enterprise. Consider two examples. Example 1. With round the clock work of the company shipping products actually takes place twice a day for 2 h, ie only 4 hours from 24. In these "peak hours" involved the entire fleet trucks are busy all the driveways, under load is the maximum number of trucks. The rest of the time shift from trucks operated minimal or moderate intensity …. More – Online